[1] Nshimiyimana P, Miraucourt D, Messan A, Courard L. (2009) Calcium carbide residue and rice husk ash for improving the compressive strength of compressed earth blocks. MRS Advances. 2018;3(34-35): -14. https://doi.org/10.1557/adv.2018.147
[2] Ukritnukun S, Sorrell CC, Gregg D, Vance ER, Koshy P. (2018) Potential Use of Ambient-Cured Geopolymers for Intermediate Level Nuclear Waste Storage. MRS Advances.;3(20):1123-31. https://doi.org/10.1557/adv.2018.276
[3] Ghafoor MT, Fujiyama C, Maekawa K. (2021) Mix Design Processing for Self-Compacting Geopolymer Mortar. Journal of Advanced Concrete Technology.19(11):1133-47. https://doi.org/10.3151/jact.19.1133
[4] McNulty E. (2009) Geopolymers: an environmental alternative to carbon dioxide producing ordinary Portland cement. Department of Chemistry, The Catholic University of America.
[5] Radhakrishna. (2020) Strength Assessment in Portland Cement and Geopolymer Composites with Abrams' Law as Basis. JOURNAL OF ADVANCED CONCRETE TECHNOLOGY.;18(6):320-7.
[6] Comrie DC, Kriven WM, editors. (2004) Composite cold ceramic geopolymer in a refractory application. Advances in Ceramic Matrix Composites IX, Proceedings.
[7] Bakharev T. (2006) Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing. Cement and concrete Research;36(6):1134-47. https://doi.org/10.1016/j.cemconres.2006.03.022
[8] Özcan A, Karakoç MB. (2019) The resistance of blast furnace slag-and ferrochrome slag-based geopolymer concrete against acid attack. International Journal of Civil Engineering;17(10):1571-83. https://doi.org/10.1007/s40999-019-00425-2
[9] Mayta-Ponce D, Soto-Cruz P, Huamán-Mamani F. (2019) Thermomechanical evaluation of new geopolymer binder from demolition waste and ignimbrite slits for application in the construction industry. MRS Advances ;4(54):2951-8. https://doi.org/10.1557/adv.2019.474
[10] Kong DL, Sanjayan JG. (2010) Effect of elevated temperatures on geopolymer paste, mortar and concrete. Cement and concrete research.;40(2):334-9. https://doi.org/10.1016/j.cemconres.2009.10.017
[11] Chinapaiya B, Parshwanath RN, Radhakrishnan J, Thirunavukkarasu R. (2020) Adhesive Bond Strength of Steel Bars Embedded in Fly Ash-GGBS-based Geopolymer Concrete. Journal of Advanced Concrete Technology.;18(11):716-29. https://doi.org/10.3151/jact.18.716
[12] Aslani F. (2016) Thermal performance modeling of geopolymer concrete. Journal of Materials in Civil Engineering.;28(1):04015062. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001291
[13] Ganesh AC, Muthukannan M. (2019) Effect of elevated temperature over geopolymer concrete. International Journal of Engineering and Advanced Technology (IJEAT).;9(1S4):450-3. https://doi.org/10.35940/ijeat.A1025.1291S419
[14] Assaedi H, Alomayri T, Shaikh F, Low I-M. (2019) Influence of nano silica particles on durability of flax fabric reinforced geopolymer composites. Materials.;12(9):1459. https://doi.org/10.3390/ma12091459
[15] Deb PS, Sarker PK, Barbhuiya S. (2015) Effects of nano-silica on the strength development of geopolymer cured at room temperature. Construction and building materials.;101:675-83. https://doi.org/10.1016/j.conbuildmat.2015.10.044.
[16] Adak. (2017) Structural performance of nano-silica modified fly-ash based geopolymer concrete. Construction and Building Materials.;135:430-9. https://doi.org/10.1016/j.conbuildmat.2016.12.111.
[17] Ekinci E, Türkmen İ, Kantarci F, Karakoç MB. (2019) The improvement of mechanical, physical and durability characteristics of volcanic tuff based geopolymer concrete by using nano silica, micro silica and Styrene-Butadiene Latex additives at different ratios. Construction and Building Materials.;201:257-67. https://doi.org/10.1016/j.conbuildmat.2018.12.204.
[18] Adak. (2014) Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Construction and Building Materials.;70:453-9. https://doi.org/10.1016/j.conbuildmat.2014.07.093.
[19] VU CM, LE TA, SATOMI T, TAKAHASHI H. (2017) Study on effect of chemical composition of geopolymer to improve sludge by using fiber materials. Advanced Experimental Mechanics.;2:168-73. https://doi.org/10.11395/aem.2.0_168
[20] Alberti MG, Enfedaque A, Gálvez JC. (2015) Improving the reinforcement of polyolefin fiber reinforced concrete for infrastructure applications. Fibers.;3(4):504-22. https://doi.org/10.3390/fib3040504.
[21] Ganesh C, Muthukannan M, Kumar AS, Arunkumar K. (2021) Influence of Bacterial Strain Combination in Hybrid Fiber Reinforced Geopolymer Concrete subjected to Heavy and Very Heavy Traffic Condition. Journal of Advanced Concrete Technology.;19(4):359-69. https://doi.org/10.3151/jact.19.359
[22] Yousefvand M, Sharifi Y, Yousefvand S. (2019) An Analysis of the Shear Strength and Rupture Modulus of Polyolefin-Fiber Reinforced Concrete at Different Temperatures. Journal of civil Engineering and Materials Application.;3(4):238-54. https://doi.org/ 10.22034/jcema.2019.102829
[23] Rashad AM. (2019) The effect of polypropylene, polyvinyl-alcohol, carbon and glass fibres on geopolymers properties. Materials Science and Technology.;35(2):127-46. https://doi.org/10.1080/02670836.2018.1514096.
[24] Nagajothi S, Elavenil S. (2021) Shear Prediction of geopolymer concrete beams using Basalt/Glass FRP bars. Journal of Advanced Concrete Technology.;19(3):216-25. https://doi.org/10.3151/jact.19.216
[25] Adhikary SK, Rudzionis Z, Balakrishnan A, Jayakumar V. (2019) Investigation on the mechanical properties and post-cracking behavior of polyolefin fiber reinforced concrete. Fibers.;7(1):8. https://doi.org/10.3390/fib7010008
[26] Noushini A, Castel A, Gilbert RI. (2019) Creep and shrinkage of synthetic fibre-reinforced geopolymer concrete. Magazine of Concrete Research.;71(20):1070-82. https://doi.org/10.1680/jmacr.18.00053.
[27] Pilehvar S, Cao VD, Szczotok AM, Carmona M, Valentini L, Lanzón M, et al. (2018) Physical and mechanical properties of fly ash and slag geopolymer concrete containing different types of micro-encapsulated phase change materials. Construction and Building Materials.;173:28-39. https://doi.org/10.1016/j.conbuildmat.2018.04.016
[28] C989/C989M‐18a (2018) A. Standard specification for slag cement for use in concrete and mortars. ASTM International West Conshohocken, PA.
[29] EN B. (2000) Testing hardened concrete. Method of determination of compressive strength of concrete cubes. BS EN 12390 Part.;3.
[30] ASTM C-. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.
[31] Galan A, (1967) editor Estimate of concrete strength by ultrasonic pulse velocity and damping constant. Journal Proceedings.
[32] 544-2R-89 A. (1999) ‘Measurement of properties of fiber reinforced concrete’. Reported by ACI Committee.;544.
[33] Bakhtiyari S, Allahverdi A, Rais-Ghasemi M, Zarrabi B, Parhizkar T. (2011) Self-compacting concrete containing different powders at elevated temperatures–Mechanical properties and changes in the phase composition of the paste. Thermochimica acta.;514(1-2):74-81. https://doi.org/10.1016/j.tca.2010.12.007
[34] Bentz DP. (2000) Fibers, percolation, and spalling of high-performance concrete. Materials Journal.;97(3):351-9.
[35] Zhang B, Bicanic N. (2002) Residual fracture toughness of normal-and high-strength gravel concrete after heating to 600 C. Materials Journal.;99(3):217-26.
[36] 363 AC, (1984) editor State-of-the-art Report on High-strength Concrete (ACI 363R-84): American Concrete Institute.
[37] Nath P, Sarker PK. (2017) Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete. Construction and Building Materials.;130:22-31. https://doi.org/10.1016/j.conbuildmat.2016.11.034.
[38] Diaz-Loya EI, Allouche EN, Vaidya S. (2011) Mechanical properties of fly-ash-based geopolymer concrete. ACI materials journal.;108(3):300.
[39] 363 AC. (1993) State of the art of high strength concrete. American Concrete Institute.
[40] Sumajouw D, Hardjito D, Wallah S, Rangan B. (2007) Fly ash-based geopolymer concrete: study of slender reinforced columns. Journal of materials science.;42(9):3124-30. https://doi.org/10.1007/s10853-006-0523-8.
[41] Sahmaran M, Yurtseven A, Yaman IO. (2005) Workability of hybrid fiber reinforced self-compacting concrete. Building and Environment.;40(12):1672-7. https://doi.org/10.1016/j.buildenv.2004.12.014.
[42] Whitehurst EA, (1951) editor Soniscope tests concrete structures. Journal Proceedings.
[43] Kwan WH, Ramli M, Kam KJ, Sulieman MZ. (2012) Influence of the amount of recycled coarse aggregate in concrete design and durability properties. Construction and Building Materials.;26(1):565-73. https://doi.org/10.1016/j.conbuildmat.2011.06.059.
[44] Ren W, Xu J, Bai E. (2015) Strength and ultrasonic characteristics of alkali-activated fly ash-slag geopolymer concrete after exposure to elevated temperatures. Journal of Materials in Civil Engineering.;28(2):04015124. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001406.
[45] Fan F, Liu Z, Xu G, Peng H, Cai C. (2018) Mechanical and thermal properties of fly ash based geopolymers. Construction and Building Materials.;160:66-81. https://doi.org/10.1016/j.conbuildmat.2017.11.023
[46] Olivito R, Zuccarello F. (2010) An experimental study on the tensile strength of steel fiber reinforced concrete. Composites Part B: Engineering.;41(3):246-55. https://doi.org/10.1016/j.compositesb.2009.12.003.
[47] Du H, Du S, Liu X. (2014) Durability performances of concrete with nano-silica. Construction and building materials.;73:705-12.https://doi.org/10.1016/j.conbuildmat.2014.10.014.
[48] Hua S, Zhang L, Zhang J, Jiang M, Guo D, Tong F, et al. (2020) Study on Physical and Chemical Properties of High Magnesium Nickel Slag-Phosphogysum Composite Cementitious Materials in Different Particle Sizes. Journal of Advanced Concrete Technology.;18(3):129-38. https://doi.org/10.3151/jact.18.129
