Volume 6, Issue 4 (6-2022)                   NMCE 2022, 6(4): 67-77 | Back to browse issues page

XML Print

1- Associate Professor, Faculty of Civil Engineering, K. N. Toosi University of Technology, Tehran, Iran. , fanaie@kntu.ac.ir
2- Graduate Student, Faculty of Civil Engineering, K. N. Toosi University of Technology, Tehran, Iran.
Abstract:   (443 Views)
A potential multi-hazard scenario for buildings is the sequential occurrence of fire and earthquake. This scenario is possible if an initial seismic event triggers fire and a subsequent aftershock occurs. To study the post-fire seismic performance, a numerical study is presented on a two-story self-centering steel plate shear wall. This system consists of post-tensioned elements such as strands and bars to reduce the residual drift in the structure and energy dissipator devices to dissipate the seismic input energy. This paper assesses the seismic behavior of self-centering steel plate shear walls after fire loading and proposes modifications to their structural details so that fire robustness can be achieved in addition to seismic resilience. This system is simulated using the finite element method (FEM) and is verified based on available experimental results. Then, fire loading is applied, and results are compared for protected and unprotected models. Results showed that protecting steel members with fire-resistant coating can significantly improve the post-fire seismic performance of the system. The protected models reveal higher lateral strength relative to unprotected models with an increase in temperature. The maximum lateral strength of the self-centering steel plate shear wall model with shielded steel web panels, the model with shielded strands, and the model with both shielded strands and steel web panels are respectively 56%, 21%, and 61% greater than the model without fire-resistant coating at 700 °C.
Full-Text [PDF 482 kb]   (156 Downloads)    
Type of Study: Research | Subject: Special
Received: 2022/01/5 | Revised: 2022/01/28 | Accepted: 2022/02/6 | ePublished ahead of print: 2022/02/22

1. D. K. Miller, "Lessons learned from the Northridge earthquake," Eng. Struct., vol. 20, no. 4-6, pp. 249-260, 1998, doi: 10.1016/S0141-0296(97)00031-X. [DOI:10.1016/S0141-0296(97)00031-X]
2. M. D. Engelhardt and T. A. Sabol, "Reinforcing of steel moment connections with cover plates: Benefits and limitations," Eng. Struct., vol. 20, no. 4-6, pp. 510-520, 1998, doi: 10.1016/S0141-0296(97)00038-2. [DOI:10.1016/S0141-0296(97)00038-2]
3. D. M. Dowden, R. Purba, and M. Bruneau, "Behavior of Self-Centering Steel Plate Shear Walls and Design Considerations," J. Struct. Eng., vol. 138, no. 1, pp. 11-21, 2012, doi: 10.1061/(ASCE)st.1943-541x.0000424. [DOI:10.1061/(ASCE)ST.1943-541X.0000424]
4. F. J. Perez, R. Sause, S. Pessiki, and L.-W. Lu, "Lateral load behavior of unbonded post-tensioned precast concrete walls," Adv. Build. Technol., pp. 423-430, 2002, doi: 10.1016/b978-008044100-9/50055-3. [DOI:10.1016/B978-008044100-9/50055-3]
5. J. I. Restrepo, J. Mander, and T. J. Holden, "New Generation of Structural Systems for Earthquake Resistance," New Zeal. Soc. Earthq. Eng. 2001 Conf., pp. 1-9, 2001.
6. J. I. Restrepo and A. Rahman, "Seismic Performance of Self-Centering Structural Walls Incorporating Energy Dissipators," J. Struct. Eng., vol. 133, no. 11, pp. 1560-1570, 2007, doi: 10.1061/(ASCE)0733-9445(2007)133:11(1560). [DOI:10.1061/(ASCE)0733-9445(2007)133:11(1560)]
7. N. H. Hamid and J. B. Mander, "Lateral Seismic Performance of Multipanel Precast Hollowcore Walls," J. Struct. Eng., vol. 136, no. 7, pp. 795-804, 2010, doi: 10.1061/(ASCE)st.1943-541x.0000183. [DOI:10.1061/(ASCE)ST.1943-541X.0000183]
8. P. M. Clayton, D. M. Dowden, T. Winkley, J. W. Berman, M. Bruneau, and L. N. Lowes, "Experimental investigation of self-centering steel plate shear walls," Struct. Congr. 2012 - Proc. 2012 Struct. Congr., pp. 1586-1597, 2012, doi: 10.1061/9780784412367.141. [DOI:10.1061/9780784412367.141]
9. E. Nobahar, B. Asgarian, A. Torabi Goodarzi, and O. Mercan, "Optimal placement of post-tensioned self-centering yielding braced systems for braced frame structures," Numer. Methods Civ. Eng., vol. 4, no. 2, pp. 17-35, 2019, doi: 10.52547/nmce.4.2.17. [DOI:10.52547/nmce.4.2.17]
10. J. Liu, L. Xu, and Z. Li, "Development and experimental validation of a steel plate shear wall with self-centering energy dissipation braces," Thin-Walled Struct., vol. 148, 2020, doi: 10.1016/j.tws.2019.106598. [DOI:10.1016/j.tws.2019.106598]
11. T. Hitaka and C. Matsui, "Experimental Study on Steel Shear Wall with Slits," J. Struct. Eng., vol. 129, no. 5, pp. 586-595, 2003, doi: 10.1061/(ASCE)0733-9445(2003)129:5(586). [DOI:10.1061/(ASCE)0733-9445(2003)129:5(586)]
12. W. Wang, J. Kong, Y. Zhang, G. Chu, and Y. Chen, "Seismic Behavior of Self-Centering Modular Panel with Slit Steel Plate Shear Walls: Experimental Testing," J. Struct. Eng., vol. 144, no. 1, p. 04017179, 2018, doi: 10.1061/(ASCE)st.1943-541x.0001932. [DOI:10.1061/(ASCE)ST.1943-541X.0001932]
13. A. A. Kajbaf. N Fanaie, "Investigation on the Influence of Posttensioned Strands on the behavior of SelfCentering Connection under Fire Loading," 2018.
14. S. Ni and A. C. Birely, "Post-fire seismic behavior of reinforced concrete structural walls," Eng. Struct., vol. 168, pp. 163-178, 2018, doi: 10.1016/j.engstruct.2018.04.018. [DOI:10.1016/j.engstruct.2018.04.018]
15. F. Mazza, "Behaviour during seismic aftershocks of r.c. base-isolated framed structure with fire-induced damage," Eng. Struct., vol. 140, pp. 458-472, 2017, doi: 10.1016/j.engstruct.2017.03.008. [DOI:10.1016/j.engstruct.2017.03.008]
16. L. Jin, X. Li, R. Zhang, and X. Du, "Meso-scale modelling the post-fire seismic behavior of RC short columns," Eng. Fail. Anal., vol. 120, 2021, doi: 10.1016/j.engfailanal.2020.105117. [DOI:10.1016/j.engfailanal.2020.105117]
17. P. M. Clayton, J. W. Berman, and L. N. Lowes, "Subassembly testing and modeling of self-centering steel plate shear walls," Eng. Struct., vol. 56, pp. 1848-1857, 2013, doi: 10.1016/j.engstruct.2013.06.030. [DOI:10.1016/j.engstruct.2013.06.030]
18. "ATC. Guidelines for seismic testing of components of steel structures. Tech. Rep. 24. Applied Technology," 1992.
19. "Brussels: European Committee for Standardization DD ENV; 3: Design of steel structures-Part 1.2: General rules-Structural fire design, E. Eurocode," 1993.