Volume 5, Issue 3 (3-2021)                   NMCE 2021, 5(3): 13-22 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hamedi M R, Mohammadgholiha M, Vosoughifar H R, Hamedi N. A multi-objective optimization approach to optimal sensor placement of irregular LSF structures. NMCE 2021; 5 (3) :13-22
URL: http://nmce.kntu.ac.ir/article-1-308-en.html
1- Ph.D. Student, Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
2- Ph.D. student, Department of Electrical, Electronic, and Information Engineering, University of Bologna, Bologna, Italy. , m.mohammadgholiha@unibo.it
3- Associate professor, Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
4- Graduate Student, Department of Architecture, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
Abstract:   (898 Views)
In recent years, lightweight steel framed (LSF) structures are designed to resist fire, earthquakes, and storm events. This system has entered the field of construction due to advantages of light members. Based on these advantages, such a system is also used for buildings with special importance. Structural health monitoring (SHM) implements a damage detection and characterization strategy for engineering structures.  In the present study, a multi-objective numerical method for optimal sensor placement based on the combination of Modal Assurance Criteria (MAC) and maximum stress has been proposed. Genetic Algorithm (GA) was employed to determine the location of sensors on the structure based on the structural dynamic response of the LSF system. To show the efficiency of the proposed method, a very large irregular museum building, which was built by using LSF system, has been considered. To improve the proposed method, dominant frequencies are identified and the number of sensors is decreased using the Fourier Transform (FT) of the ground motions time history. Results show that the proposed method can provide the optimal sensor locations and remarkably reduce the number of required sensors and also improve their optimum location.
Full-Text [PDF 733 kb]   (417 Downloads)    
Type of Study: Applicable | Subject: General
Received: 2020/11/22 | Revised: 2021/01/2 | Accepted: 2021/02/5 | ePublished ahead of print: 2021/02/17

References
1. Xu L, Tangorra FM. (2007). Experimental investigation of lightweight residential floors supported by cold-formed steel C-shape joists. Journal of constructional steel research, 63(3), 422-35. [DOI:10.1016/j.jcsr.2006.05.010]
2. Al-Kharat M, Rogers CA. (2007). Inelastic performance of cold-formed steel strap braced walls. Journal of Constructional Steel Research, 63(4), 460-74. [DOI:10.1016/j.jcsr.2006.06.040]
3. Dubina D. (2008). Behavior and performance of cold-formed steel-framed houses under seismic action. Journal of Constructional Steel Research, 64(7-8), 896-913. [DOI:10.1016/j.jcsr.2008.01.029]
4. Moghimi H, Ronagh HR. (2009). Performance of light-gauge cold-formed steel strap-braced stud walls subjected to cyclic loading. Engineering Structures, 31(1), 69-83. [DOI:10.1016/j.engstruct.2008.07.016]
5. Glisic B, Inaudi D. (2008). Fibre optic methods for structural health monitoring. John Wiley & Sons. [DOI:10.1002/9780470517819]
6. Doebling SW, Farrar CR, Prime MB, Shevitz DW. (1996). Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review. Los Alamos National Lab, NM (United States). [DOI:10.2172/249299]
7. Turner JD, Pretlove AJ. (1988). A study of the spectrum of traffic-induced bridge vibration. Journal of Sound and Vibration, 122(1), 31-42. [DOI:10.1016/S0022-460X(88)80004-X]
8. Su WC, Huang CS, Hung SL, Chen LJ, Lin WJ. (2012). Locating damaged stories in a shear building based on its sub-structural natural frequencies. Engineering Structures, 39, 126-38. [DOI:10.1016/j.engstruct.2012.02.002]
9. Karami Mohammadi, R., Khalaj, M., Mohammadgholiha, M. (2018). Curvature Method to Detect Location and Depth of a Plastic Zone in Frame Members during an Earthquake. Journal of Numerical Methods in Civil Engineering, 3(2), 1-12. [DOI:10.29252/nmce.3.2.1]
10. Ciambella J, Vestroni F, Vidoli S. (2011). Damage observability, localization and assessment based on Eigen frequencies and eigenvectors curvatures. Smart Structures and Systems, 8(2), 191-204. [DOI:10.12989/sss.2011.8.2.191]
11. Kim JT, Ho DD, Nguyen KD, Hong DS, Shin SW, Yun CB, Shinozuka M. (2013). System identification of a cable-stayed bridge using vibration responses measured by a wireless sensor network. Smart Structures and Systems, 11(5), 533-53. [DOI:10.12989/sss.2013.11.5.533]
12. Cao M, Radzieński M, Xu W, Ostachowicz W. (2014). Identification of multiple damage in beams based on robust curvature mode shapes. Mechanical Systems and Signal Processing, 46(2), 468-80. [DOI:10.1016/j.ymssp.2014.01.004]
13. Amaravadi VK, Rao VS, Koval LR, Derriso MM. (2001, August). Structural health monitoring using wavelet transforms. In Smart Structures and Materials 2001: Smart Structures and Integrated Systems (Vol. 4327, pp. 258-270). International Society for Optics and Photonics. [DOI:10.1117/12.436537]
14. Castro E, Garcia-Hernandez MT, Gallego A. (2006). Damage detection in rods by means of the wavelet analysis of vibrations: Influence of the mode order. Journal of sound and vibration, 296(4-5), 1028-38. [DOI:10.1016/j.jsv.2006.02.026]
15. Castro E, Garcia-Hernandez MT, Gallego A. (2007). Defect identification in rods subject to forced vibrations using the spatial wavelet transform. Applied Acoustics, 68(6), 699-715. [DOI:10.1016/j.apacoust.2006.04.003]
16. Papadimitriou C. (2004). Optimal sensor placement methodology for parametric identification of structural systems. Journal of sound and vibration, 278(4-5), 923-47. [DOI:10.1016/j.jsv.2003.10.063]
17. Carne TG, Dohrmann CR. (1995, February). A modal test design strategy for model correlation. In Proceedings-Spie. The International Society For Optical Engineering (pp. 927-927). SPIE INTERNATIONAL SOCIETY FOR OPTICAL.
18. Hemez FM, Farhat C. (1994, January). An energy based optimum sensor placement criteria and its application to structural damage detection. In Proceedings-SPIE The International Society for Optical Engineering (pp. 1568-1568). SPIE INTERNATIONAL SOCIETY FOR OPTICAL.
19. Roohi, Milad, Eric M. Hernandez. (2020). Performance-based post-earthquake decision making for instrumented buildings. Journal of Civil Structural Health Monitoring. 10, 775-792. [DOI:10.1007/s13349-020-00416-1]
20. Roohi, Milad, Eric M. Hernandez, and David Rosowsky. (2020). Reconstructing element-by-element dissipated hysteretic energy in instrumented buildings: application to the Van Nuys Hotel testbed. arXiv: Signal Processing: arXiv:2002.12426. [DOI:10.1061/(ASCE)EM.1943-7889.0001864]
21. Roohi, Milad, Eric M. Hernandez, and David Rosowsky. (2019) .Nonlinear Seismic Response Reconstruction in Minimally Instrumented Buildings-Validation Using NEESWood Capstone Full-Scale Tests. Structural Health Monitoring. 10.12783/shm2019/32390 [DOI:10.12783/shm2019/32390]
22. Roohi, Milad, et al. (2020). An extended model-based observer for state estimation in nonlinear hysteretic structural systems. Mechanical Systems and Signal Processing 146: 107015. [DOI:10.1016/j.ymssp.2020.107015]
23. Miller RE. (1998). Optimal sensor placement via Gaussian quadrature. Applied mathematics and computation, 97(1), 71-97. [DOI:10.1016/S0096-3003(97)10120-5]
24. Kammer DC. (1991). Sensor placement for on-orbit modal identification and correlation of large space structures, Journal of Guidance, Control and Dynamics, 14 (2), 251-259. [DOI:10.2514/3.20635]
25. Hiramoto K, Doki H, Obinata G. (2000). Optimal sensor/actuator placement for active vibration control using explicit solution of algebraic Riccati equation. Journal of Sound and Vibration, 229(5), 1057-75. [DOI:10.1006/jsvi.1999.2530]
26. Wouwer AV, Point N, Porteman S, Remy M. (2000). An approach to the selection of optimal sensor locations in distributed parameter systems. Journal of process control, 10(4), 291-300. [DOI:10.1016/S0959-1524(99)00048-7]
27. Worden K, Burrows AP. (2001). Optimal sensor placement for fault detection. Engineering structures, 23(8), 885-901. [DOI:10.1016/S0141-0296(00)00118-8]
28. Cobb RG, Liebst BS. (1997). Sensor placement and structural damage identification from minimal sensor information. AIAA journal, 35(2), 369-74. [DOI:10.2514/2.103]
29. Shi ZY, Law SS, Zhang LM. (2000). Optimum sensor placement for structural damage detection. Journal of Engineering Mechanics, 126(11), 1173-9. [DOI:10.1061/(ASCE)0733-9399(2000)126:11(1173)]
30. Shokouhi SK, Vosoughifar HR. (2013). Optimal sensor placement in the lightweight steel framing structures using the novel TTFD approach subjected to near-fault earthquakes. Journal of Civil Structural Health Monitoring, 3(4), 257-67. [DOI:10.1007/s13349-013-0053-4]
31. Holland JH. (1975). Adaptation in natural and artificial systems. An introductory analysis with application to biology, control, and artificial intelligence. Ann Arbor, MI: University of Michigan Press, 439-44.
32. Cold-Formed Steel Design Manual and Specification Bundle, 2010. AISI, USA.
33. Hwang CL. et Yoon, K. .(1981). Multiple Attribute Decision Making, Methods and Applications: a State of the Art Survey. Lecture notes in economics and mathematical systems, Springer-Verlag, New York, NY. [DOI:10.1007/978-3-642-48318-9_3]

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author