Volume 1, Issue 1 (9-2016)                   NMCE 2016, 1(1): 1-6 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Danesh F, Faridalam M A. Numerical study on the behavior of link-to-column connections in eccentrically braced frames. NMCE 2016; 1 (1) :1-6
URL: http://nmce.kntu.ac.ir/article-1-30-en.html
1- Associate Professor, Civil Engineering Department ,K.N. Toosi University of Technology, Tehran Iran
2- MSc in earthquake engineering,Civil Engineering Department,K.N. Toosi University of Technology,Iran
Abstract:   (2214 Views)
Geometry of eccentrically braced frames (EBFs) in some cases causes the connection of link beam to the column. The details of such conditions should be studied carefully due to the full plastic rotation in the link beam. In this research, the behavior of link-to-column connection is modeled and the failure modes are considered. Based on the previous researches shear link can exhibit better behavior in such conditions. However, different models are designed and analyzed using finite element method to investigate the influence of short, medium and long link beams on the failure modes of the connections. Two types of connections are applied in designing these models. The results show that models with access hole in connection details are failed before achieving 50% full plastic rotation in the link beams. Besides, in the connections without access hole, the link beams behave as ductile elements and experience up to 90% full plastic rotation that are recommended by the codes.
Full-Text [PDF 584 kb]   (853 Downloads)    
Type of Study: Research | Subject: Special
Received: 2013/09/9 | Revised: 2014/03/4 | Accepted: 2014/05/18 | ePublished ahead of print: 2014/05/28

References
1. [1] E.P. Popov, J.O. Malley, Design of Links and Beam-to-column Connections for Eccentrically Braced Steel Frames, Report No. UCB/EERC-83/03, Earthquake Engineering Research Center, University of California at Berkeley, 1983.
2. [2] M.D. Engelhardt, E.P. Popov, Behavior of Long Links in Eccentrically Braced Frames, Report No. UCB/EERC-89/01, Earthquake Engineering Research Center, University of California at Berkeley, 1989.
3. [3] T. Okazaki, M.D. Engelhardt, M. Nakashima, K. Suita, Experimental Performance of Link-to-Column Connections in Eccentrically Braced Frames, J. Struct. Engrg., 132(8), 1201-1211, 2006 [DOI:10.1061/(ASCE)0733-9445(2006)132:8(1201)]
4. [4] AISC. Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications. Standard ANSI/AISC 358-05, American Institute of Steel Construction, Inc., Chicago, IL, 2005.
5. [5] J.M. Ricles, C. Mao, L.W. Lu, J.W. Fisher, Ductile Details for Welded Unreinforced Moment Connections Subject to Inelastic Cyclic Loading. Engrg. Struct., 25, 667-679, 2002. [DOI:10.1016/S0141-0296(02)00176-1]
6. [6] A.M. Kanvinde, G.G Deierlein, The Void Growth Model and the Stress Modified Critical Strain Model to Predict Ductile Fracture in Structural Steels, J. Struct. Engrg., ASCE, 132(12), 1907-1918, 2006. [DOI:10.1061/(ASCE)0733-9445(2006)132:12(1907)]
7. [7] AISC. Seismic provisions for structural steel buildings. Standard ANSI/AISC 341-02, American Institute of Steel Construction, Inc., Chicago, IL, 2002.
8. [8] Q.S. Yu, C.M. Uang, J. Gross, Seismic Rehabilitation Design of Steel Moment Connection with Welded Haunch. J. Struct. Engrg., ASCE, 126(1), 67-78, 2000. [DOI:10.1061/(ASCE)0733-9445(2000)126:1(69)]
9. [9] Ch. Lee, Seismic Design Of Rib-Reinforced Steel Moment Connections Based On Equivalent Strut Model. J. Struct. Engrg., ASCE, 128(9), 1121-9, 2002. [DOI:10.1061/(ASCE)0733-9445(2002)128:9(1121)]

Add your comments about this article : Your username or Email:
CAPTCHA