Wed, Nov 30, 2022
**[Archive]**

BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks

Sabouri-Ghomi S, Ahouri E. Investigation the Effect of Strengthening Various Subpanels in the SPSPs with Two Rectangular Openings. NMCE 2022; 6 (3) :11-27

URL: http://nmce.kntu.ac.ir/article-1-346-en.html

URL: http://nmce.kntu.ac.ir/article-1-346-en.html

2- Ph.D. Candidate, Faculty of Civil Engineering, K.N. Toosi University of Technology, Tehran, Iran.

Type of Study: Research |
Subject:
Special

Received: 2021/07/11 | Revised: 2021/09/24 | Accepted: 2021/10/18 | ePublished ahead of print: 2021/10/29

Received: 2021/07/11 | Revised: 2021/09/24 | Accepted: 2021/10/18 | ePublished ahead of print: 2021/10/29

1. Sabouri-Ghomi, S., Roberts, T.M. 1991. Hysteretic characteristics of unstiffened plate shear panels. Journal of Thin-Walled Structures,12(2), pp. 145-162. [DOI:10.1016/0263-8231(91)90061-M]

2. Sabouri-Ghomi, S., Roberts, T.M. 1992. Hysteretic characteristics of unstiffened perforated plate shear panels. Journal of Thin-Walled Structures, 14(2), pp.139-151. [DOI:10.1016/0263-8231(92)90047-Z]

3. Sabouri-Ghomi, S., Ventura, C.E., Kharrazi, M.H.K. 2005. Shear analysis and design of ductile steel plate walls. ASCE Journal of Structural Engineering, 131(6), pp. 878-889. [DOI:10.1061/(ASCE)0733-9445(2005)131:6(878)]

4. Sabouri-Ghomi, S. 2002. Lateral load resisting systems: An introduction to Steel Plate Shear Walls. 1st Edition. Tehran, Iran: Angizeh Publishing Company.

5. Sabouri-Ghomi, S., Sajadi, R. 2012. Experimental and theoretical studies of steel shear walls with and without stiffeners. Journal of Constructional Steel Research, 75, pp.152-159. [DOI:10.1016/j.jcsr.2012.03.018]

6. Sajadi, S.R.A. 2009. Behavior of steel plate shear walls with opening. (PhD dissertation). Khajeh Nasir Toosi University of Technology, Tehran, Iran.

7. Sabouri-Ghomi, S., Mamazizi, S. 2015. Experimental investigation on stiffened steel plate shear walls with two rectangular openings. Journal of Thin-Walled Structures, 86, pp. 56-66. [DOI:10.1016/j.tws.2014.10.005]

8. Vian, D., Bruneau, M., Purba, R. 2009.Special perforated steel plate shear walls with reduced beam section anchor beams. II: analysis and design recommendations. ASCE Journal of Structural Engineering, 135(3), pp. 221-228 [DOI:10.1061/(ASCE)0733-9445(2009)135:3(221)]

9. Purba, R., Bruneau, M. 2009. Finite-element investigation and design recommendations for perforated steel plate shear walls. ASCE Journal of Structural Engineering, 135(11), pp.1367-1376. [DOI:10.1061/(ASCE)ST.1943-541X.0000061]

10. Chan, R., Albermani, F., Kitipornchai, S. 2011. Stiffness and strength of perforated steel plate shear wall. Journal of Procedia Engineering, 14, pp. 675-679. [DOI:10.1016/j.proeng.2011.07.086]

11. Ding, Y., Deng, E.F., Zong, L., Dai, X.M., Lou, N., Chen, Y. 2017. Cyclic tests on corrugated steel plate shear walls with openings in modularized-constructions. Journal of Constructional Steel Research, 138, pp. 675-691. [DOI:10.1016/j.jcsr.2017.08.019]

12. Bhowmick, A.K., Grondin, G.Y., Driver, R.G. 2014. Nonlinear seismic analysis of perforated steel plate shear wall. Journal of Constructional Steel Research, 94, pp. 103-113. [DOI:10.1016/j.jcsr.2013.11.006]

13. Mu, Z., Yang, Y. 2020. Experimental and numerical study on seismic behavior of obliquely stiffened steel plate shear walls with openings. Journal of Thin-Walled Structures, 146, 106457. [DOI:10.1016/j.tws.2019.106457]

14. Moghimi, H., Driver, R.G. 2014. Column demands in steel plate shear walls with regular perforations using performance-based design methods. Journal of Constructional Steel Research, 103, pp. 13-22. [DOI:10.1016/j.jcsr.2014.07.020]

15. Choi, I.R., Park, H.G. 2009. Steel plate shear walls with various infill plate designs. ASCE Journal of Structural Engineering, 135(7), pp. 785-796. [DOI:10.1061/(ASCE)0733-9445(2009)135:7(785)]

16. Shekastehband, B., Azarakhsh, A.A., Showkati, H. 2017. Hysteretic behavior of perforated steel plate shear walls with beam-only connected infill plates. Journal of Steel and composite Structures, 25(4), pp. 505-521.

17. Bahrebar, M., Zirakian, T., Hajsadeghi, M. 2015. Nonlinear buckling analysis of steel plate shear walls with trapezoidally corrugated and perforated infill plates. Proceeding of Annual Stability Conference Structural Stability Research Council, Nashville, Tennessee, March 24-27, 2015.

18. Alinia, M.M., Sarraf Shirazi, R. 2009. On the design of stiffeners in steel plate shear walls. Journal of Constructional Steel Research, 65, pp. 2069-2077. [DOI:10.1016/j.jcsr.2009.06.009]

19. Hosseinzadeh, S.A.A., Tehranizadeh, M. 2012. Introduction of stiffened large rectangular openings in steel plate shear walls. Journal of Constructional Steel Research, 77, pp. 180-192. [DOI:10.1016/j.jcsr.2012.05.010]

20. Yu, C., Yu, G. 2016. Experimental investigation of cold-formed steel framed shear wall using corrugated steel sheathing with circular holes. ASCE Journal of Structural Engineering, 142(12), 04016126. [DOI:10.1061/(ASCE)ST.1943-541X.0001609]

21. Dastfan, M., Driver, R. 2016. Large-scale test of a modular steel plate shear wall with partially encased composite columns. ASCE Journal of Structural Engineering, 142(2): 04015142. [DOI:10.1061/(ASCE)ST.1943-541X.0001424]

22. Cao, Z., Wang, Z., Du, P., Liu, H., Fan, F. 2019. Research on steel plate shear walls stiffened with X-Shaped restrainers: hysteretic behavior and effect of height-to-thickness ratio of steel plate. Journal of Thin-Walled Structures, 144 (6), 106316. [DOI:10.1016/j.tws.2019.106316]

23. Nateghi, F., Alavi, E. 2009. Non-linear behavior and shear strength of diagonally stiffened steel plate shear walls. International Journal of Engineering, 22, pp. 343-356.

24. Nie, J.G., Zhu, L., Fan, J.S., Mo, Y.L. 2013. Lateral resistance capacity of stiffened steel plate shear walls. Journal of Thin-Walled Structures, 67, pp. 155-167. [DOI:10.1016/j.tws.2013.01.014]

25. Egorova, N., Eatherton, M., Maurya, M. 2014. Experimental study of ring-shaped steel plate shear walls. Journal of Constructional Steel Research, 103, pp. 179-189. [DOI:10.1016/j.jcsr.2014.09.002]

26. Farzampour, A., Laman, J.A. 2015. Behavior prediction of corrugated steel plate shear walls with openings. Journal of Constructional Steel Research, 114, pp. 258-268. [DOI:10.1016/j.jcsr.2015.07.018]

27. Zirakian, T., Zhang, J. 2015. Structural performance of unstiffened low yield point steel plate shear walls. Journal of Constructional Steel Research, 112, pp. 40-53. [DOI:10.1016/j.jcsr.2015.04.023]

28. Qiu, J., Zhao, Q., Yu, C., Li, Z. 2018. Experimental studies on cyclic behavior of corrugated steel plate shear walls. ASCE Journal of Structural Engineering, 144(11): 04018200. [DOI:10.1061/(ASCE)ST.1943-541X.0002165]

29. Wang, J.J., Tao, M.X., Fan, J.S., Nie, X. 2018. Seismic behavior of steel plate reinforced concrete composite shear walls under tension-bending-shear combined cyclic load. ASCE Journal of Structural Engineering, 144(7), 04018075. [DOI:10.1061/(ASCE)ST.1943-541X.0002073]

30. Nassernia, S., Showkati, H. 2017. Experimental study of opening effects on mid-span steel plate shear walls. Journal of Constructional Steel Research, 137, pp. 8-18. [DOI:10.1016/j.jcsr.2017.05.021]

31. Emami, F., Mofid, M., Vafai, A. 2013. Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls. Journal of Engineering Structures, 48, pp. 750-762. [DOI:10.1016/j.engstruct.2012.11.028]

32. Emami, F., Mofid, M. 2014. On the hysteretic behavior of trapezoidally corrugated steel shear walls. Journal of the Structural Design of Tall and Special Buildings, 23(2), pp. 94-104. [DOI:10.1002/tal.1025]

33. Barua, K., Bhowmick, A.K. 2019. Nonlinear seismic performance of code designed perforated steel plate shear walls. Journal of Steel and Composite Structures, 31(1), pp. 85-98.

34. Berman, J.W., Bruneau, M. 2005. Comparing hysteretic behavior of light-gauge steel plate shear walls and braced frames. Journal of Engineering Structures, 27, pp. 475-485. [DOI:10.1016/j.engstruct.2004.11.007]

35. Shariati, M., Safaei Faegh, S., Mehrabi, P., Bahavarnia, M., Zandi, Y., Rezaee Masoom, D., Toghroli, A., Trung, N.T., Salih, M. 2019. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings. Journal of Steel and Composite Structures, 33(4), pp. 569-581.

36. Berman, JW. 2011. Seismic behavior of code designed steel plate shear walls. Journal of Engineering Structures, 33(1), pp. 230-244. [DOI:10.1016/j.engstruct.2010.10.015]

37. Mu, Z., Yang, Y. 2020. Experimental and numerical study on seismic behavior of obliquely stiffened steel plate shear walls with openings. Journal of Thin-walled Structures, 146, 106457. [DOI:10.1016/j.tws.2019.106457]

38. Bypour, M., Kioumarsi, M., Yekrangnia, M. 2021 Shear capacity prediction of stiffened steel plate shear walls (SSPSW) with openings using response surface method. Journal of Engineering Structures, 226, 111340. [DOI:10.1016/j.engstruct.2020.111340]

39. Meghdadian, M., Gharaei, M., Arabshahi, A., Mahdavi, N., Ghalenovi, M. 2020. Proposition of an equivalent reduced thickness for composite steel plate shear walls containing an opening. Journal of Constructional Steel Research, 168, 105985. [DOI:10.1016/j.jcsr.2020.105985]

40. Ali, M.M., Osman, S.A., Husam, O.A., Al Zand, A.W. 2018. Numerical study of the cyclic behavior of steel plate shear wall systems (SPSWs) with differently shaped openings. Journal of Steel and Composite Structures, 26(3), pp. 361-373.

41. Hibbitt, Karlsson, and Sorenson, Inc. (HKS). 2017. ABAQUS/standard users' manual, Hibbitt, Karlsson, and Sorenson, Inc., Pawtucket, R.I.

42. Sabouri-Ghomi, S., Kharrazi, M.H.K., Mamazizi, S., Sajadi, R. Buckling behavior improvement of steel plate shear wall systems. Journal of the Structural Design of Tall and Special Buildings, 17(4), pp. 823-837. [DOI:10.1002/tal.394]

Send email to the article author

Journal of Numerical Methods in Civil Engineering © 2016 by K. N. Toosi University of Technology is licensed under Creative Commons Attribution 4.0 International License