XML Print

1- Associate Professor, Department of Civil Engineering, Faculty of Engineering, Bu Ali Sina University, Hamedan, Iran.
2- Assistant Professor, Department of Civil and Architect Engineering, Faculty of Engineering, Raja University, Qazvin, Iran. , M.Farnam@raja.ac.ir
3- Master of Civil-Structural Engineering, Department of Civil Engineering, Faculty of Engineering, Bu Ali Sina University, Hamedan, Iran.
Abstract:   (249 Views)
In this research, a nonlinear finite element analysis is used to both evaluate and validate two experimental samples. The Hognestad stress-strain model expresses the uniaxial compressive behavior of concrete to define three-dimensional concrete in the ABAQUS software, and the linear model to introduce its tensile behavior. Furthermore, a bilinear model with kinematic hardening is used to simulate the behavior of the steel. Both corner and knee joints including transverse beams and slabs are investigated using experimental results from different aspects including force-displacement hysteresis diagram, the effect of stiffness deterioration, fractural mode, energy absorption rate, the contour of fracture, and Von-Mises stress. This study examines two different models which presents the predictive modeling, so it is shown the current model has remarkable power and high reliability by taking into some important effective parameters in the modeling including, account vulnerable regions, design codes defects, the impact of concrete confinement in large plastic strains, and local buckling. To sum up, this research not only provides a reliable model with the lowest inaccuracy in the study of concrete corner beam-column under seismic load but also presents a simplification in the modeling process that highly reduces the analysis time. 
Type of Study: Research | Subject: Special
Received: 2021/06/27 | Revised: 2022/05/11 | Accepted: 2022/05/30 | ePublished ahead of print: 2022/06/15

Add your comments about this article : Your username or Email:

Send email to the article author